For suppliers & decorators

Make your products available in the editor. Always receive production-ready files.

Standardized input files from every connected reseller. 80% fewer manual corrections, automated order intake, and a growing pool of demand.

80%
fewer corrections
calculated across 72 partners running the software
84
ecommerce resellers ordering through FastEditor
563,981
ready configurations
84 ecommerce resellers ordering through FastEditor. 150+ supplier catalogs are connected.
A configuration is one product in one color with one decoration method, already mapped to print specs.
FastEditor Product Hub catalog of production-ready configurations

What does FastEditor do for suppliers?

FastEditor puts your catalog inside the editor that resellers and distributors already use to design, quote and order. You add each product once in the Product Hub, with images per color variant, your print specs per decoration method and the marking areas.

From then on, every mockup, proof and order from a connected reseller is validated against your specs before it reaches you, and arrives as a production-ready file in the right format for the technique. Your prepress team stops fixing other people’s files.

Manual corrections
80% fewer
Files production-ready
99.95%
Development work
None for most suppliers
Pricing basis
Catalog size, not order volume
Per-order fee or commission
None

Standardized input. Fewer corrections. Faster production.

Stop fixing other people’s files. Every order arrives clean, correct, and ready to run.

Specs enforced at the source

Your print specs are applied to every reseller’s order before it reaches you. Off-spec files stop before they reach you.

80% fewer corrections

Standardized, validated input means your prepress team stops re-drawing and re-checking artwork.

Automated order intake

Orders arrive as production-ready files, routed into your workflow without manual handling.

Reseller files by email vs orders through FastEditor

The same order, handled two ways.

Reseller files by emailOrders through FastEditor
Print specsEach reseller interprets your spec sheet themselvesStored once in the Product Hub and applied to every order
Artwork checkYour prepress team inspects, re-draws and re-checksValidated at upload: line thickness, color count and placement in the marking area
Off-spec filesFound in prepress, after the order is placedRejected while the person who caused it is still there to fix it
OutputWhatever format the reseller happens to sendThe right file per technique: color separations, stitch files, high-res raster, vector
Order intakeManual handling per orderRouted into your workflow or ERP by API
Spec changesA new spec sheet sent to every resellerOne change propagates to every connected shop

What we need from you

Your product catalog, your print specs per decoration method, and your artwork templates. We map them once in the Product Hub. Most suppliers onboard without any development work on their side.

More resellers, same quality.

Scale demand without scaling your prepress team.

Connected demand

Reach 84 ecommerce resellers ordering through FastEditor.

Right output, every method

Color separations, stitch files, high-res, generated per technique.

No custom development

Onboard your catalog without building integrations.

API-driven intake

Orders flow straight into your ERP, hands-off.

One product configuration. Always a print-ready file.

Make your products available in the editor to all resellers and distributors.

1
Add your product
You add it once in the Product Hub, with product images per color variant, the production techniques and specs you work to, and the marking areas.
2
Available to everyone
The editor configuration for that product becomes available to every reseller and distributor in the network, including connected platforms such as Promidata and European Sourcing.
3
Validated against your specs
Every mockup, proof and visual is validated against your production specs, from line thickness to placement inside the marking area, and corrected where needed.
4
Fully production-ready files
Once the customer confirms the order, FastEditor generates the production-ready files. No e-proofs to make, nothing else to prepare.
FastEditor Product Hub product configuration

Proof from the network

“FastEditor got the large majority of our 1,600 plus models production-ready in the Product Hub automatically. That is the scale and quality we need to move faster.”
Matthijs van Gessel · Giving Europe
FAQ

Questions suppliers ask before they connect.

Onboarding, spec control, order intake and commercial terms, answered.

Ask us anything
What do I actually have to give you?

Three things: your product catalog, your print specs per decoration method, and your artwork templates. You send them once in whatever format you already keep them in, and we map them into the Product Hub. No integration work, no data cleanup project, and no changes to how your systems run today.

Who does the onboarding work, my team or yours?

Ours. We do the mapping from the files you send, and most suppliers onboard without any development work on their side. XD Connects had 650 products live 3.5 weeks after standardizing reseller input, and Giving Europe got the large majority of 1,600 plus models production-ready automatically. Your team supplies the specs and checks the result.

Does this cannibalize my own webshop?

No, it feeds it. The Logo Editor can run on your own site so your visitors personalize on your product pages, with the production file coming out the other end. The Product Hub is a separate route that puts your catalog in front of 84 ecommerce resellers already ordering through FastEditor. Your direct channel and your reseller channel run on the same specs.

Do I lose control of my print specs?

No. You define them, you own them, and you change them whenever you want. They are stored once in the Product Hub and applied automatically to every reseller order across the network, which is more control than you have today, when each reseller interprets your spec sheet themselves. A change you make propagates to every connected shop and every rep quoting your products.

How do orders actually reach me?

As finished production files, routed into your workflow or ERP by API with no manual handling. Each arrives in the right format for the technique: color separations for screen print, stitch files for embroidery, high-resolution raster for DTG, and vector for engraving. Your prepress team receives work that is ready to run instead of files to inspect.

What if a reseller sends a bad file anyway?

It does not get that far. Artwork is validated against your specs at the point of upload, including line thickness, color count and placement inside the marking area, so an off-spec file is rejected while the person who caused it is still there to fix it. Suppliers running this report 80% fewer corrections, and 99.95% of files come out production-ready.

What does this cost me as a supplier?

Supplier participation is priced on the size of your catalog, not on your order volume, and it covers getting your products templated into the Product Hub. Under 50 base SKUs is €1,995 setup and €95 per month, 50 to 250 base SKUs is €4,995 setup and €395 per month, and over 250 base SKUs is €9,995 setup and €995 per month. There is no per-order fee and no commission on order value. The monthly maintenance keeps your specs, print areas and product data current as your range changes. This tariff is for catalog participation and does not cover running the editor on your own website, which is the separate reseller-style plan on the pricing page.

Pricing

Catalog participation

Get your range templated into the Product Hub so every reseller in the network orders against your exact specs. Priced on catalog size, not order volume. No per-order fee, no commission.

Small supplier
Under 50 base SKUs
€1,995
setup, one time
+ €95 / month
keeps specs and print areas current
Medium supplier
50 to 250 base SKUs
€4,995
setup, one time
+ €395 / month
keeps specs and print areas current
Large supplier
Over 250 base SKUs
€9,995
setup, one time
+ €995 / month
keeps specs and print areas current

Monthly maintenance starts on your contract start date. Participation includes connecting your feed or API, importing products and enriching product data, including print-area coordinates. There are no additional charges beyond the agreed tier for this work. Editor usage is separate: running the editor on your own website is a Connect, Build or Own plan. See the pricing page.

Put your catalog where resellers already order.

Send us your catalog, print specs and artwork templates once. We map them in the Product Hub, and every connected reseller orders against your exact specs.

No per-order fee. No commission on order value.